Installing/Removing The Processor; Technical Data; Graphics Controller - Fujitsu Siemens Computers D2764 Short Description

Brief description of mainboard

Graphics controller

• Intel iQ35 or iQ33
• 256 Mbyte video memory
• Support of ADD2 cards (single and dual DVI adapter cards)
Resolution (colour depth up to 32 bits/pixel)
1024 x 768 (recommended / max*)
1280 x 1024 (recommended / max*)
1600 x 1200 (recommended / max*)
1440 x 900 Widescreen TFT (VGA/DVI)
1680 x 1050 Widescreen TFT (VGA/DVI)
1920 x 1200 Widescreen TFT (VGA/DVI)
* Maximum video refresh rate for the graphics setting. The video quality may be
be deteriorated if the maximum setting is used.

Installing/removing the processor

Disconnect the system from the mains voltage before performing any of the tasks
described below. Details are contained in the operating manual of your system.

Technical data

• Intel® Core 2 Duo Exxxx and Intel® Celeron® 4xx, with 800 / 1066 / 1333 MHz
TM
MHz Front Side Bus (max. 65 W) in the LGA775 design
• A current list of the processors supported by this mainboard is available on the
Internet at: "www.fujitsu-siemens.com/mainboards".
Never touch the underside of the processor. Even minor soiling such as grease
from the skin can impair the processor's operation or destroy the processor.
Place the processor in the socket with extreme care, as the spring contacts
of the socket are very delicate and must not be bent.
If one or more spring contacts are bent, on no account insert the processor as it
may be damaged by doing so. Please contact the responsible vendor.
2 - English A26361-D2764-Z110-1-7419, edition 1
Frequency
120/200 Hz
100/120 Hz
85/120 Hz
x/x
x/x
x/x