Gigabyte GA-EG41MF-US2H User Manual page 40

System Memory Multiplier (SPD)
Allows you to set the system memory multiplier. Options are dependent on CPU FSB and the
(G)MCH Frequency Latch settings. Auto sets memory multiplier according to memory SPD
data. (Default: Auto)
Memory Frequency (Mhz)
The first memory frequency value is the normal operating frequency of the memory being used;
the second is the memory frequency that is automatically adjusted according to the CPU Host
Frequency (Mhz) and System Memory Multiplier settings.
DRAM Timing Selectable (SPD)
Manual allows all DRAM timing control items below to be configurable.
Options are: Auto (default), Manual.
>>>>> Standard Timing Control
CAS Latency Time
Options are: Auto (default), 3~7.
tRCD
Options are: Auto (default), 1~15.
tRP
Options are: Auto (default), 1~15.
tRAS
Options are: Auto (default), 1~63.
>>>>> Advanced Timing Control
Advanced Timing Control
x tRRD
x tWTR
x tWR
x tRFC
x tRTP
x Command Rate (CMD)
>>>>> Channel A
 Channel A Timing Settings
 Channel A Driving Settings
>>>>> Channel B
 Channel B Timing Settings
 Channel B Driving Settings
: Move
Enter: Select
F5: Previous Values
GA-EG41MF-US2H Motherboard
CMOS Setup Utility-Copyright (C) 1984-2009 Award Software
Advanced Timing Control
Auto
Auto
Auto
Auto
Auto
Auto
[Press Enter]
[Press Enter]
[Press Enter]
[Press Enter]
+/-/PU/PD: Value
F6: Fail-Safe Defaults
F10: Save
- 40 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults