Abit BX6 Pentium II User Manual page 30

3-6
Attention: After you have set up the parameters and left the BIOS
CPU Power Supply:
This option allows you to switch between CPU Default and user define
voltage.
äCPU Default: System will detect CPU type and select proper
äUser define:
Method 1: Setup up the CPU for the lowest speed for its brand.
Turn the power supply off and change the CPU. Then
turn the system on again, and set up the CPU
parameters through CPU SOFT MENU.
Method 2: Since you have to open the computer case when you
change the CPU , it could be a good idea to use the
CCMOS jumper to erase the parameters of the
original CPU and to enter BIOS Setup to configure
the CPU parameters again.
SETUP, and verified that the system can be booted, do
not press the Reset button and turn off the power supply
at the sometime.
correctly, the parameters will fail and you must enter
CPU SOFT MENU
again.
voltage automatically. When it is enabled ,the
option "Core Voltage" will show the current
voltage setting that is defined by the CPU and this
will not be changeable. We recommend is using
this CPU default setting and not changing it unless
current CPU type and voltage setting can not be
detected or not correct.
This option lets the user select the voltage manually.
You can change values of the "Core Voltage"
option lists by using the Page Up and Page Down
keys.
Otherwise, the BIOS will not read
™
II to set up the parameters all over
Chapter 3