Connecting To The Tv By Rf Cable; Inserting Batteries In The Remote Control - Topfield TF6500F User Manual

2.5 Inserting Batteries in The Remote Control

2.4.4 Connecting to The TV by RF Cable

2.5 Inserting Batteries in The Remote Control
LNB IN
R - AUDIO - L
RF OUT
RF IN
LNB OUT
VIDEO
Connect the aerial antenna cable to the RF IN socket on the
digital receiver, and then plug a RF cable into the RF OUT
socket on the digital receiver and the corresponding input socket
on the television.
LNB IN
R - AUDIO - L
RF OUT
RF IN
LNB OUT
VIDEO
1. Open the battery compartment by removing the lid.
2. Insert the batteries Observe the polarity (marked on the
base of the battery compartment).
3. Close the battery compartment.
S/PDIF TV RS-232
S/PDIF TV RS-232
9