JBL PRX515 User Manual page 14

PRX518S
System Type:
Frequency Range (-10 dB):
Frequency Response (±3 dB):
Crossover Modes:
Crossover Frequency:
System Power Rating:
LF Power amp:
Distortion:
Maximum SPL:
Signal indicators:
Input sensitivity:
Input Impedance:
Polarity:
LF Driver:
Enclosure:
Suspension / Mounting:
Transport:
Finish:
Grille:
Input Connectors:
Dimensions (H x W x D):
Net Weight:
1
Maximum Peak output measured with IEC pink noise at 1 meter in front of speaker baffle under free space conditions. Measurement instrument
set to peak hold. Speaker muted and released at full power, recording maximum peak level.
14
Self powered 18", two-way, bass-reflex,
37Hz -140Hz
52Hz – 110Hz
DSP controlled 48dB filter slope
110Hz
500 W continuous, 1000W peak
Class-D, 500 Watt (continuous) at driver impedance
Less than 0.1% at rated power
1
129dB SPL peak
Overload: Red LED indicates input overload condition
Signal: Green LED indicates signal presents
-25 dBu to 0 dBu
34K Ohms (balanced), 18K Ohms (unbalanced)
0° or 180° phase shift
1 x JBL 2044E 460 mm (18 in) woofer
Rectangular, 18 mm, plywood
36mm pole socket on top
2 x die-cast handles with backing cup
Anthracite DuraFlex™ finish
Powder coated, Anthracite, 18 gauge perforated steel
with acoustical transparent black foam backing.
Balanced XLR 1/4 inch combo jack with XLR loop through. (stereo)
725 mm x 535 mm x 610 mm
(28.5 in x 21 in x 24 in)
36 kg (79 lb.)