Hot Water Dispensing - Saeco Moltio User Manual

6 The machine reminds you to insert the carafe and pull out the milk
carafe dispenser.
7
The following icon is displayed during pre-heating time required by
the machine.
8
When the desired amount of frothed milk is reached, press the "
button.
Now the "frothed milk" button is programmed. Every time it is pressed, the
machine will brew the same amount of frothed milk that was programmed.

HOT WATER DISPENSING

Warning:
Danger of scalding! Dispensing may be preceded by sprays of hot wa-
ter and steam. Danger of burns! Wait until the end of the cycle before
removing the water dispensing spout.
1
Slightly tilt the water dispensing spout and then insert it all the way in
into the guides of the machine.
2
Push the water dispensing spout towards the bottom while rotating at
the same time, until it is locked in the machine as shown in the fi gure.
ENGLISH
45 45
"