Replacing A Headlight Bulb - Yamaha Zuma YW125A Owner's Manual

1
1. Spare fuse
2. Remove the blown fuse, and then
install a new fuse of the specifi ed
amperage. WARNING! Do not
use a fuse of a higher amper-
age rating than recommended
to avoid causing extensive
damage to the electrical sys-
tem and possibly a fi re.
PERIODIC MAINTENANCE AND ADJUSTMENT
Specifi ed fuses:
Main fuse:
20 A
Ignition fuse:
10 A
Signaling system fuse:
15 A
Headlight fuse:
10 A
Fuel injection system fuse:
10 A
TIP
After removing and installing the main
fuse, be sure to turn the main switch
from "ON" to "OFF" three times in
three-second intervals to initialize the
idle speed control system.
[EWA15131]
3. Turn the key to "ON" and turn on
the electrical circuit in question to
check if the device operates.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.

Replacing a headlight bulb

1. Headlight
This model is equipped with quartz
bulb headlights. If a headlight bulb
burns out, have a Yamaha dealer re-
place it and, if necessary, adjust the
headlight beam.
6-28
EAU1722A
EAU34240
1
1
2
3
4
5
6
7
8
9