Table of Contents
Advertisement
FILE LOCATION: E:\workarea\customer\MAXNET\061101_ML-3731Manual-revisions\ch5e.fm
Problem
Poor picture quality when using a
device connected to the TV
connector
Nothing appears on my TV
I can't get HD to display on my TV
DELL CONFIDENTIAL – PRELIMINARY 12/6/06 – FOR PROOF ONLY
Possible Solution
Ensure TV display is selected as the input source in the Input
1
Source menu. See "Input Select" on page 26 for more
information.
Press Menu on the remote control, select Setup, and then
2
select Channel Setup. This resets the channels on your TV.
Check the aspect ratio settings in the OSD Menu. Press the
3
Menu button on the remote control and select Size.
Reset the original factory defaults. Press Menu on the remote
4
control, select Setup, and then select Factory Reset.
Adjust the color temperature. Press Menu on the remote
5
control, select Picture, and then select Color Temperature.
The problem may be with your device, contact your service
6
provider.
Caused by displaying a low resolution NTSC (analog) TV
7
broadcast using a high-definition display. There is an inherit
limitation of NTSC TV; therefore, try to get HD content from
your cable or satellite service provider.
Ensure the TV display is turned on.
1
Verify that all the cables are properly connected to the TV
2
display, including the power cable.
Check to see if there is a blue light on the lower, right- hand
3
corner of the TV display. A blue light indicates the TV display
is on.
Ensure the proper source is selected in the Input Source
4
menu. See "Input Select" on page 26 for more information.
Reconnect any devices that are currently connected to the TV
5
display. If you are using multiple devices, connect and test
one device at a time.
Connect another device that you know is working properly.
6
Reset the original factory defaults. Press Menu on the remote
7
control, select Setup, and then select Factory Reset.
You are not feeding the TV a high-definition signal. We
1
recommend that you upgrade your current home broadcast
service to HDTV standards. Please refer to page 1 of the
Quick Start Guide.
Troubleshooting Problems With Your TV
32
Advertisement
Table of Contents
