Sony DXC-D55 Series Brochure & Specs page 9

Dxc-d55 series 14-bit full-digital production camera
Hide thumbs Also See for DXC-D55 Series:
Table of Contents

Advertisement

Multi-core CCU Operation –
for End-to-End Digital Systems
CCU-D50P and CA-D50
With
the
CA-D50
Camera
attached,
the
DXC-D55
Series
be remotely controlled from the CCU-D50P
Multi-core Camera Control Unit using a
CCZ-A cable (26-pin). The video and audio
output of the CA-D50 Camera Adaptor are
transferred to the CCU-D50P Camera
Control Unit as a component digital-SDI
1
signal*
through a CCZ-A cable up to 75 m
(246 feet) long. This combination allows the
establishment of a fully digital acquisition
system.
The CCU-D50P supports the following
features:
> Digital or analogue signal switchable
transmission
> Up to 75 m (246 feet) digital-SDI
transmission via a CCZ-A cable (26-pin)
> Up to 200 m (656 feet) digital-SDI
transmission using a separate low-loss
coaxial video cable in addition to a CCZ
cable
> Analogue transmission for longer control
distances of up to 300 m (984 feet) via a
CCZ-A cable
> Analogue composite output and one of
the following outputs: SDI, Y/R-Y/B-Y,
RGB, Y/C
> Wide variety of control functions
> Compatibility with RCP-D50 and
RCP-D51 Remote Control Panels
> Support for major intercom systems
(two-wire/four-wire/RTS/Clearcom)
> Teleprompter support
> Red/Green tally indication*
2
> Fan alarm LED*
2
*1 Embedded audio is not supported
*2 The tally and fan alarm share the same LED
CCU-D50P Front Panel
CCU-D50P Rear Panel
Remote Controllers
Two types of remote controllers are avail-
able for remote operation of the DXC-D55
Series cameras, each offering direct camera
control.
Adaptor
can
RCP-D50 (Joystick Type)
RCP-D51 (Dial Type)
The RCP-D50 and RCP-D51 have been
designed for use with Sony DXC-D55
Series cameras. The RCP-D50 is a joystick-
type controller, while the RCP-D51 is a
dial-type controller. Both are equipped
with a 3.5-inch* colour touch panel LCD
screen and offer extensive control of
camera functions through easy-to-use
menu-based operations. The LCD also
allows the incoming camera image to be
monitored – a feature that comes in handy
when identifying which RCP is controlling
which camera in multi-camera systems.
Another convenient feature is the Memory
Stick system, which allows various scene
files to be stored on and recalled from
a Memory Stick and loaded to either
a different RCP-D50/D51 controller, or to
a DXC-D55 Series camera.
*Viewable area measured diagonally
RCP-D50 (Joystick)
RCP-D51 (Dial)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents