Philips HTB5150D User Manual page 41

Disc does not play high-definition video.
• Make sure that the disc contains high-
definition video.
• Make sure that the TV supports high-
definition video.
• Use an HDMI cable to connect to the TV.
Sound
No sound from home theater speakers.
• Connect the audio cable from your home
theater to your TV or other devices.
However, you do not need a separate
audio connection when:
• the home theater and TV are
connected through an HDMI ARC
connection, or
a device is connected to the HDMI IN
•
connector on your home theater.
• Set up the audio for the connected device
(see 'Set up the audio' on page 13).
• Reset your home theater to its factory
settings (see 'Restore default settings' on
page 32), and then switch it off and switch
on again.
On your home theater, press SOURCE
•
repeatedly to select the correct audio
input.
No sound from wireless subwoofer.
1
Switch off the home theater and then
switch it on again.
2
Switch the home theater to AUX source.
3
Press and hold CONNECT on the
subwoofer until the indicator on the back
of the subwoofer blinks.
4
Press and hold Navigation button
for at least three seconds.
» When the wireless connection
succeeds, the indicator on the
subwoofer lights up.
» If the wireless pairing fails, repeat steps
1 to 4 to connect your subwoofer to
the SoundBar.
Distorted sound or echo.
• If you play audio from the TV through the
home theater, make sure that the TV is
muted.
• If the sound from the wireless subwoofer
is interrupted or distorted, make that the
subwoofer is far away from microwave
ovens, DECT phones, or other Wi-Fi
devices.
Audio and video are not synchronized.
• 1) Press
2) Press the Navigation buttons (left/right)
to select AUD SYNC, and then press OK.
3) Press the Navigation buttons (up/
down) to synchronize the audio with the
video.
Play
Cannot play a disc.
• Clean the disc.
• Make sure that the home theater supports
the type of disc (see 'Media formats' on
page 35).
• Make sure that the home theater supports
the region code of the disc (see 'Region
codes' on page 35).
• If the disc is a DVD±RW or DVD±R disc,
make sure that it is finalized.
Cannot play a DivX file.
• Make sure that the DivX file is encoded
according to the 'Home Theater Profile'
with the DivX encoder.
• Make sure that the DivX file is complete.
DivX or RMVB/RM subtitles do not display
(right) correctly.
• Make sure that the subtitle file name is
the same as the movie file name (see
'Subtitles' on page 18).
• Select the correct character set:
1) Press OPTIONS.
2) Select [Character set].
3) Select the supported character set.
4) Press OK.
SOUND SETTINGS.
EN
39