Labeling An Input Source; Using Cec Control; Turning Cec Control On Or Off - Sharp LC-42LB150U User Manual

Sharp 42" LED TV

Labeling an input source

You can add a label to an input source to make it
easier to identify in the INPUT SOURCE list.
To label an input source:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight SETUP, then press
ENTER. The SETUP menu opens.
3 Press or to highlight Input Labels, then
press ENTER. The SETUP · INPUT LABELS screen
opens with the input source field highlighted.
4 Press or to select the input source you want
to label, then press
5 Press or to select a character, then press
or to move to the previous or next character
position. Repeat this step to enter additional
characters.
6 When you have completed the label, press
ENTER to save your label and return to the
previous menu. The next time you press INPUT,
your label appears in the INPUT SOURCE list.
7 Press EXIT to close the menu.
or
to move to the label field.
www.sharpusa.com

Using CEC Control

CEC Control lets you control HDMI CEC-compatible
devices connected to the HDMI jacks on your TV
using the remote control that came with your TV. To
use CEC Control, you must set the CEC Control
setting on the SETUP · CEC menu to On.
Notes
• HDMI cables must be used to connect
HDMI CEC-compatible devices to your
TV.
• The connected device's HDMI CEC
feature must be turned on.
• If you connect an HDMI device that is
not HDMI CEC-compatible, all of the
CEC features do not work.
• Depending on the connected HDMI
device, the CEC feature may not work.

Turning CEC Control on or off

To turn CEC Control on or off:
1 Press MENU. The on-screen menu opens.
2 Press or to highlight SETUP, then press
ENTER. The SETUP menu opens.
3 Press or to highlight CEC, then press
ENTER. The SETUP · CEC menu opens.
4 Press or to highlight CEC Control, then
press ENTER.
5 Press or to highlight On or Off, then press
ENTER.
6 Press MENU to return to the previous menu, or
press EXIT to close the menu.
or
59