Speed Dial Memo - Toshiba Strata DK8 User Manual

STRATA DK DIGITAL LCD TELEPHONE
4. Dial the intercom number
(N N) of the station for which
the NAME/NUMBER
information is to be recorded.
D E S T E K T N O . N N
5. Press the Page button.
U S E R N A M E ?
_
6. Enter the new information via
the dialpad (refer to
Recording a Message for
method).
7. Press the Spkr button.
8. Repeat steps 2 ~ 7 to enter
more names/numbers.
9. To turn Soft Keys on, press
Mode 7 1 when your
telephone is idle.
"USER NAME?" will appear on the upper line of the LCD, and current
information for station NN will appear on the lower line of the LCD.
Up to 16 characters can be recorded. It is recommended that you enter
the station number along with the user's name.
The new information is stored and appears on the top line of station NN's
LCD. Station 10's LCD returns to the normal idle display.
NOTES:
1. To erase the NAME/NUMBER information of another station,
repeat Steps 1 ~ 6 above and enter blanks in Step 5. Blanks are
entered by pressing 1 in the alpha mode.
2. Station NN may set and clear the NAME/NUMBER feature
anytime:
Set: Intercom 6 2 1 .
Clear: Intercom 6 2 0 . "Clear" eliminates the display when
calling, but does not erase it from memory.

SPEED DIAL MEMO

This feature allows an LCD user to program a 12-character name for
each of his/her 40 personal speed dial numbers. The memo pad of
names may be stepped through to select the appropriate party. Memos
may also be added to the 40 system speed dial codes via station number
______ (usually 10).
MESSAGES AND MEMOS
4-7