Receiving Calls - Turtle Beach Ear Force i60 User Manual

Bluetooth setup and Operation
dual Pairing
The i60 can be simultaneously paired to two Bluetooth-enabled devices at once. For example, you can pair the i60 to a
digital music player or tablet and your mobile phone at the same time. If your mobile phone is also a digital music player,
you can stream music to your headset as well. The i60 will automatically remember the last two paired devices upon
powering on.
NOTe: Only one Bluetooth device can be active on the headset at a time. For example, if you are making a call with the
headset while streaming music from a second device, the music will be turned off until the call is over.
Making Calls with iPhone
Making calls
Once the i60 is successfully paired with your iPhone, you can use the headset to make and receive calls.
When idle or on a call the Bluetooth LED will blink Blue
If you want to...
Activate voice dialing.
Making calls
Use iPhone keys to make a call.
If you want to...
Redial last number.
Turn off the microphone.
Activate voice dialing.
Use iPhone keys to make a call.
Adjust the volume.
Redial last number.
End a call.
Turn off the microphone.
NOTe: Media Audio will be lowered automatically during the call.

Receiving calls

Adjust the volume.
End a call.
If you want to...
receiving Calls
Accept a call.
When the i60 Bluetooth is powered on and there is an incoming call you will hear a musical chime or your default phone
Receiving calls
ring tone.
Reject a call.
If you want to...
Accept a call.
Reject a call.
End a call.
Streaming music from iOS devices
End a call.
If you want to...
Play/Pause.
Streaming music from iOS devices
Then...
Double-tap the tap sensor. (Red Oval)
Dial the number as normal.
Then...
Double-click Bluetooth button.
Press the Mic Mute button. Press again to turn the
Double-tap the tap sensor. (Red Oval)
microphone back on.
Dial the number as normal.
Press the Bluetooth Volume Up and Down buttons.
Double-click Bluetooth button.
Press the Bluetooth button once or tap the tap sensor once.
Press the Mic Mute button. Press again to turn the
microphone back on.
Press the Bluetooth Volume Up and Down buttons.
Press the Bluetooth button once or tap the tap sensor once.
Then...
Press the Bluetooth button once or tap the tap
sensor once. (Red Oval)
To send the call directly to your voicemail, press and hold
Then...
the Bluetooth button for three seconds until you hear a beep.
Press the Bluetooth button once or tap the tap You can also do nothing, which will send the call to voicemail
sensor once. (Red Oval)
after the programmed number of rings.
To send the call directly to your voicemail, press and hold
Press the Bluetooth button once or tap the tap sensor once.
the Bluetooth button for three seconds until you hear a beep.
You can also do nothing, which will send the call to voicemail
after the programmed number of rings.
Press the Bluetooth button once or tap the tap sensor once.
Then...
Press the Bluetooth Button once.
23