LG CX670 User Manual page 121

Specific Absorption Rate
(SAR) in the Human Body
Due to Wireless
Communications Devices:
Experimental Techniques,'
sets forth the first consistent
test methodology for
measuring the rate at which
RF is deposited in the heads
of wireless phone users. The
test method uses a
tissuesimulating model of the
human head. Standardized
SAR test methodology is
expected to greatly improve
the consistency of
measurements made at
different laboratories on the
same phone. SAR is the
measurement of the amount
of energy absorbed in tissue,
either by the whole body or a
small part of the body. It is
measured in watts/kg (or
milliwatts/g) of matter. This
measurement is used to
determine whether a wireless
phone complies with safety
guidelines.
9. What steps can I take to
reduce my exposure to
radiofrequency energy from
my wireless phone?
If there is a risk from these
products - and at this point
we do not know that there
is?- it is probably very small.
But if you are concerned
about avoiding even potential
risks, you can take a few
simple steps to minimize your
exposure to radiofrequency
energy (RF). Since time is a
key factor in how much
exposure a person receives,
reducing the amount of time
spent using a wireless phone
will reduce RF exposure. If
you must conduct extended
conversations by wireless
phone every day, you could
place more distance between
your body and the source of
the RF , since the exposure
level drops off dramatically
with distance. For example,
you could use a headset and
carry the wireless phone
away from your body or use a
wireless phone connected to
a remote antenna. Again, the
scientific data do not
demonstrate that wireless
phones are harmful. But if
you are concerned about the
RF exposure from these
products, you can use
measures like those
described above to reduce
your RF exposure from
wireless phone use.
Safety
119