Table of Contents
Advertisement
Data encryption
ASCII / PASSPHRASE
Key index
Network key / Confirm
network key
EAP TYPE / Tunnel /
Provision Mode
Username / Identity /
Domain / Password
Certificate
PAC
Please click 'OK' when ready.
Select the data encryption type from
drop-down menu. This setting must be
identical with the setting of wireless access
point you with to connect.
When the encryption type is 'WEP', it's
required to input a set of 'passphrase' to
connect to wireless access point. Check 'ASCII'
or 'PASSPHRASE' depends on the security
setting of access point, and input it in the
box; if you select 'PASSPHRASE' you also need
to select the length of the key.
The passphrase must be identical with the
setting of wireless access point you with to
connect.
Select WEP key index. For most of access
points you can select '1', but please refer to
the setting of the access point.
When the encryption type is 'WPA' or
'WPA2-PSK', it's required to input a set of
'passphrase' to connect to wireless access
point. Please input the same passphrase in
two boxes for confirmation.
When authentication type is any of 802.1X,
you have to select EAP type, tunnel, and
provision mode from dropdown menu. This
setting must be identical with your 802.1x
authentication server.
Please input 802.1x related authentication
information here.
If certification is required to authenticate
with 802.1x authentication server, please
select a local certificate from dropdown list.
Check this box and PAC (Privilege Access
Certificate) will be automatically selected.
14
Advertisement
Table of Contents
