Pro Tools Recording Studio
When the installer has completed, click "Restart." Your computer will reboot automatically.
3.
4.
After your computer has finished starting up, connect Fast Track USB to an available USB
port on your computer. Fast Track USB is now installed and ready to be used.
User Guide
NOTE:
In order to hear the audio signal produced by Fast Track USB,
you must either:
1. Connect the two RCA outputs (located on the Fast Track
USB rear panel) to powered monitors, an amplifier, or a
mixer.
or
2. Connect headphones to the headphone output, located on
the front panel of Fast Track USB.
English
6