Kawai AnytimeX Owner's Manual page 9

a
Power / Volume
Used to turn on/off the control panel and adjust the
volume when AnyTime mode is activated. Turn the
knob clockwise to turn on the control panel and
increase the volume.
b
Power Indicator
Used to indicate that the control panel is turned on.
c
Control Panel
Used to select various functions when AnyTime
mode is activated. Press the area marked 'Push' to
reveal the control panel.
d
Phones
Used to connect up to two pairs of headphones
simultaneously.
e
Headphone Hook
Used to conveniently hang the headphones when
not in use.
f
LCD Display
Used to display information such as the currently
selected sound type and various other functions
and values.
* Please remove the protective plastic fi lm from the
display before use.
g
Value
Used to change the value for various functions.
h
Tone
Used to select the tone when AnyTime mode is activated.
i
Dual
Used to layer two tones together when AnyTime
mode is activated. (See page 13)
j
Reverb
Used to add reverberation to the sound when
AnyTime mode is activated, simulating the acoustic
environment of a recital room, live stage or concert
hall. (See page 14)
k
Metronome
Used to activate/deactivate the metronome.
l
Play/Stop
Used to start/stop playback of recorded songs.
m
Rec
Used to record songs. (See page 17)
n
Demo
Used to start/stop playback of demonstration pieces.
(See page 22)
o
Menu
Used to access menu functions that control
advanced features such as tuning. (See page 24)
p
LINE IN Jacks
Used to connect the stereo output from other
electronic instruments or audio equipment such as
a CD player.
q
LINE OUT Jacks
Used to connect the AnyTime mode audio signal to
an external amplifi er, speakers, or recording device
such as a computer.
r
MIDI IN/OUT Connectors
Used to connect the AnyTimeX piano to external
MIDI devices such as other electronic instruments
or computers.
s
USB Connector
Used to connect the AnyTimeX piano with a
personal computer to exchange MIDI data.
t
DC IN Jack
Used to connect the AC adaptor.
u
Mute Pedal
Used to mute the acoustic piano sound by
depressing the pedal and sliding it gently to the left,
thus activating AnyTime mode.
Do not attempt to activate/deactivate AnyTime mode
while playing the piano as this can cause serious
damage to the action mechanism of the instrument.
v
Damper Pedal
Used to remove all dampers from the strings,
allowing them to vibrate freely. This greatly enriches
the piano's sound, while also assisting the pianist
to play smooth 'legato' passages.
w
Soft Pedal / Sostenuto Pedal
Used to soften the sound, reducing its volume.
When 'Jazz Organ' or 'Drawbar Organ' sounds are
selected, the soft pedal is used to alternate the
speed of the rotary speaker simulation between
'Slow' and 'Fast' effect modes.
It is also possible to use the Soft pedal as a
Sostenuto pedal by depressing the pedal while
turning on the AnyTimeX piano control panel.
In sostenuto mode, depressing the pedal after playing
the keyboard and before releasing the keys sustains
the sound of only the keys just played. Any keys that
are pressed after the sostenuto pedal is depressed
will not be sustained after the keys are released.
Page
9
1