Setting Up The Piano - Kawai Concert Artist CA15 Owner's Manual

Setting Up the Piano

1. Connecting the power adaptor
Connect the AC power adaptor to the 'DC IN' inlet located on
the underside of the instrument, as indicated below.
3. Turning on the power
Press the POWER switch, located on the right hand side of the
instrument's front panel.
The LED indicator for the SOUND SELECT button will turn on
and the Concert Grand sound will be selected automatically.
Using headphones
Use the jacks located beneath the keyboard on the left hand
side, to connect stereo headphones to the CA15 digital piano.
When a pair of headphones is connected, sound will not be
produced by the speakers. Up to two pairs of headphones can
be connected and used simultaneously.
2. Connecting the power adaptor to an outlet
Connect the AC power adaptor to an AC outlet.
4. Adjusting the volume
Move the MASTER VOLUME slider up and down to increase
and decrease the volume level of the instrument's speakers, or
headphones if connected.
Adjust the volume to a
comfortable listening level
- the middle is often a good
starting point.
Adjusting the pedal support bolt
A pedal support bolt is attached at the base of the pedal board
to aid stability when the pedals are pushed. Turn the bolt anti-
clockwise until it makes contact with the fl oor and supports
the pedals fi rmly.
When moving the instrument, always adjust or
remove the pedal support bolt, then readjust
when the instrument is in its new position.
Increase
volume
Decrease
volume
11