Kawai CN390 Owner's Manual page 40

3. S
OUND
S S
ELECTING A OUND
D
UAL
S S
ELECTING A ONG OR A
S F
ELECTING A UNCTION
40
S B
ELECT
These buttons are used to select the desired instrument to play.
Press the appropriate button and the LED indicator of it will be turned
on to indicate that it is selected.
The Sound Select buttons have two sounds assigned to them. Repeatedly
pressing these Sound Select buttons switches between the two sounds.
When you select the variation sounds, the dots in the LED display will
light up.
You can layer any two preset sounds (Dual)
Pressing two buttons simultaneously will activate the DUAL mode.
If you want to layer the two sounds that are assigned to the same SOUND
SELECT button, hold down the SOUND SELECT button and press
either of the VALUE buttons.
P
ART
The built in recorder has the capability to record and play back up to five
different songs. Each song has two separate tracks (called "Parts") that
can be recorded or played back. The sound select buttons, except
HARPSICHORD and VIBRAPHONE, are also used for selecting a song
and a part when using the recorder.
Select the desired SONG number or PART number by pressing the
appropriate button while holding down REC or PLAY button.
These buttons are used to select the functions that control the tuning
system and MIDI configurations.
Use one of the ten buttons to select a desired function while holding
down the TOUCH and TRANSPOSE button simultaneously. (See
Page 51)
UTTONS
.
KAWAI DIGITAL PIANO CN390