Transmit Program Change (Sound Type) Numbers On / Off; Transmitting A Program Change Number Using The Sound Select Buttons - Kawai CA91 Owner's Manual

11) Transmit Program Change (Sound Type) Numbers On / Off

Transmitting a program change number using the SOUND SELECT buttons

This determines whether or not the CA piano will transmit program change information via MIDI when press-
ing the SOUND SELECT buttons. When set to on and with Multi-Timbral Mode set to off or on 1, pressing the
SOUND SELECT buttons will send the program change numbers listed in the left half of the chart on the next
page.
When multi-timbral mode is set to on 2, program numbers listed in the right half of the chart on the next page
will be transmitted via MIDI.
In addition to SOUND SELECT buttons, other button operations such as touch curve, dual, digital effect, and
reverb settings can be transmitted as MIDI exclusive data when the corresponding buttons are pushed.
When set to off no program change or other panel information will be transmitted via MIDI.
Refer to page 75 for multi-timbral mode.
Step 1
Use the MENU buttons to select the sending program change on/off function.
11 Transmit PGM
= On
The second line on the display shows On or Off.
Step 2
Use the VALUE buttons to select On or Off.
Step 3
When you are fi nished, press any one of the SOUND SELECT buttons to exit the menu.
The sending program change on/off setting defaults to "On" each time the power is turned off. You can use the user
memory function (page 76), to save your desired sending program change on/off setting. This way your current send-
ing program change on/off setting will remain even after the power is turned off.
When using dual / split mode, on / off information and sound type settings for each mode are transmitted as exclusive
data, but program numbers will not be transmitted.
Program numbers will also be transmitted when multi-timbral mode is on.
Page
73
8