Advertisement
6. TECHNICAL SPECIFICATION
INPUT
Connectors
Type
Impedance
Max input level
CMRR
OUTPUT
Connectors
Connectors
Type
Impedance
Max output level
SYSTEM SPECIFICATIONS
Bandwidth
Frequency Response
Signa/Noise
THD
Crosstalk
Stereo Coupling
Digital
FUNCTION SWITCHES
48 Volt Phantom Power
Polarity Reverse
Rumble Filter
Main L/R bus selection
INDICATORS
INPUT LEVEL
Function switch
POWER SUPPLY
Mains Voltages
Fuse
Power consumption
Mains Connection
PHYSICAL
Dimension
Net Weight
XLR and 1/4" TRS (Pin 2 and Tip hot)
Electronically balanced/unbalanced, RF filtered
Balanced >50Kohm, Unbalanced>25Kohm
>+24dBu balanced and unbalanced
Typically>60dB at 1KHz
XLR and 1/4" TRS (Pin 2 and Tip hot)
Four balanced XLR
AES/ EBU, SPDIF
Electronically balanced/unbalanced, RF filtered
Balanced 120ohm, Unbalanced>60ohm
>+21dBu,+20dBm balanced and unbalanced
20HZ to 20kHz, +0/-0.5dB
10Hz to 200kHz,+0/-3dB
128dBu, weighted, 22Hz to 22kHz
<0.007% (no vintage)
0.5% (vintage max)
<-100dB, 22Hz to 22Khz
True RMS detection
Sampling Rates
Output
Each channel of the MP2D has 48V Phantom power available.
A phase reverse switch is provided on each channel
A Rumble fiter is provided on each channel for eliminating low frequency
noise
The MP2D has a stereo summing bus for combining the input signals assigned
to the bus using the L/R function switch on the front panel of the MP2D
12 element LED display: -30/-24/-16/-8/-4/-2/0/2/4/8/16/24 dB.
LED indicator for each
USA/Canada
U.K./Australia
Europe
General Export Model
100-120VAC : 400mA (SLOW-BLOW)
200-240VAC : 200mA (SLOW-BLOW)
20 Watts
Standard IEC receptacle
W(483.0)*D(288.0)*H(44.2) mm
3.3Kg
44.1k, 48k, 88.2k, 96k, 176.4k, 192k
24-bit
~120VAC, 60Hz
~240VAC, 50Hz
~230VAC, 50Hz
~100-120VAC,
~200-240VAC, 50-60Hz
9
Advertisement
