Table of Contents
Advertisement
Setting 3D Lock
When this feature is set to On, you must enter 3D PIN
code for changing display mode.
a
In the 3D menu, press
Settings and press OK.
b
Enter your 4-digit 3D PIN code.
c
B
b
Press
/
to select 3D Lock.
d
Press
c
and
B
/
b
Setting 3D Timer Lock
When the 3D Timer Lock feature is set to On, neither the
PIN input window nor the 3D start message will be shown
while the 3D Enable timer is active, even if a switch to 3D
Mode occurs. This helps to avoid asking for the 3D Lock
PIN and displaying 3D start message every time when
switching to 3D.
NOTE: This feature cannot be selected until the 3D PIN is
set.
a
In the 3D menu, press
Settings and press OK.
b
Enter your 4-digit 3D PIN code.
c
Press
B
/
b
to select 3D Timer Lock.
d
Press
c
and
B
/
b
Setting Enable 3D Timer
This feature helps to remind you not to watch 3D video for
extended periods of time. Once a set period of time has
passed, a dialogue will be shown asking you if you wish to
continue viewing or not.
a
In the 3D menu, press
Settings and press OK.
b
Enter your 4-digit 3D PIN code.
c
Press
B
/
b
to select Enable 3D Timer.
d
c
B
b
Press
and
/
minutes.
e
To cancel the timer, select Off.
B
/
b
to select 3D Safety
to select On.
B
/
b
to select 3D Safety
to select On.
B
b
/
to select 3D Safety
to select 30, 60, 90, or 120
Displaying 3D Important Info
a
In the 3D menu, press
Important Info and press OK.
A message will appear.
Switching left and right images
The left and right images of the glasses can be swapped.
If 3D images look blurred, switch the left and right sides of
a
Press QUICK to open the Quick Menu.
b
B
b
Press
/
to select 3D Settings and press OK.
c
B
b
Press
/
to select Left and Right Image.
d
c
Press
and
OK.
Adjusting your viewing position
(for 65L/84L9363)
If you experience a double image when viewing 3D
content, adjust your viewing position.
a
In the 3D menu, press
Pattern and press OK.
The 3D Test Pattern screen is displayed.
b
Put on the 3D glasses.
c
Adjust your viewing position so that there is no
double image effect.
For the correct position for viewing 3D content, see
page 104.
35
CONTROLS AND FEATURES
B
/
b
to select 3D
the 3D image.
B
b
/
to select Swapped and press
B
/
b
to select 3D Test
Advertisement
Table of Contents
