HoMedics HX-P230A Instruction Manual

jam: The ultimate
wireless speaker!
Thank you for purchasing
the HMDX jam wireless
speaker for smartphones,
tablets, notebook
computers and other
Bluetooth enabled
devices.

Charging the Unit

Controls
1
Power Switch
2
Play/Pause Button
3
Volume Controls
4
Bluetooth Indicator
5
Line-In Audio Jack
6
Charging Port
7
Battery Status Indicator
Indicators
Indicator
Flashing RED
CHARGE
RED
(when
GREEN
charging)
Quick Flash BLUE Pairing Mode
Slow Flash BLUE Connected
RED
Listening to your device wirelessly over Bluetooth
To listen to your music over Bluetooth wireless connection, you need
to pair your device with HMDX Jam:
1. Make sure your device has Bluetooth capability.
2. Slide POWER SWITCH to turn on the unit, indicator will begin to flash.
3. Follow the instructions of your device to pair the unit.
4. Pair your device with the unit by selecting HX-P230A from your
Bluetooth listings on your device or selecting YES. If prompted,
enter "0000" as the passcode.
5. Press play on your device and use controls on the unit to adjust
desired volume.
NOTE: Once you have successfully paired your device, you typically
will not need to repeat the above steps. Please ensure the unit
source is set to Bluetooth and your device has Bluetooth enabled.
Package Contents
User Manual
Charging Cord
Approximately 3 hours required
for full charge. Can be charged
by using the USB to Micro USB
cord (included) through
computer or AC adapter with
USB jack (not included).
Note: Battery will last up to
4 hours when connected
wirelessly and up to 12 hours
when connected through
Aux-In Audio Jack.
3
L I N E
5
Status
Low Battery
Charging
Fully Charged
Line-in Mode
TM
Instruction Manual
and Warranty
Information
Speaker
1
2
4
6
I N
R G E
C H A
HX-P230A
R G E
C H A
7
®