Gps Not Found; Device Buttons; Map Views - Mio Destinator User Manual

Getting Started

GPS Not Found

When you first start your navigation device, you will hear the message "Signal too low". This message
means that your navigation device hasn't yet located a reliable GPS signal. Check that your device is
connected and has a clear view of the sky. If after five minutes, you have not located a reliable signal, go to
the "Technical Support" section on page 38.
Please check that:
• The device has a clear view of the sky for uninterrupted GPS reception. Destinator cannot calculate
the route if there is no GPS reception (for example, in a tunnel).
• The navigation device is charged or connected to the cigarette lighter.

Device Buttons

You can use the following device buttons, located on the right-side of the device:
This button turns on the device
This button displays the Destinator menu
This button lets you increase the volume.
+
This button lets you decrease the volume.
–

Map Views

You can determine whether you want to see a two-dimensional or three-dimensional map in daylight or
nighttime conditions.
The 2D Day Mode View is optimized for a daytime viewing. 2D views let you manually pan or zoom. For an
example, refer to Figure 2 - 2D Day Mode Map View.
The 2D Night Mode View is optimized for night driving or adverse weather conditions. For an example,
refer to Figure 3 - 2D Night Mode Map View.
The 3D Mode Day View or Night View provides you with a three-dimensional map for day or night
driving. For an example, refer to Figure 4 - 3D Day Mode Map View and Figure 5 - 3D Night Mode Map View.
From the Map, Look & Feel menu, click the 3D Mode
map. If the map already appears in three-dimensions, 2D Mode
button. You can click the Night Mode
already appears in night mode, Day Mode
Mio Destinator User Manual
button to view a three-dimensional
button to display the map in night conditions. If the map
is displayed on the toggle button.
is displayed on the toggle
10