Technical Specifications - Tannoy V15 User Manual

11. Technical Specifications

Frequency Response (1) +/ - 3dB
-10dB Point
Recommended Amplifier Power (passive Full Range)
Power Handling(2)
Sensitivity (1)
2.83 volt @ 1m
Maximum SPL (3)
@ 1m
Impedance
DI Averaged (PCQ)
Q Averaged (PCQ)
Distortion
Driver Complement
Crossover Point
Enclosure
Finish
Protective Grille
Connectors
Fittings
Dimensions
Weight
NOTES:
All Tannoy V Series products can be used with the Tannoy TDX2 Digital Controller for optimum system performance and when
being used with various sub bass systems. Please visit our website at
Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods
will always equal or exceed the published specifications, which Tannoy reserves the right to alter without prior notice.
Please verify the latest specifications when dealing with critical applications.
Passive Full Range
Biamp (LF)
Biamp (HF)
Passive Full range
Biamp (LF)
Biamp (HF)
Passive Full Range
Biamp (LF)
Biamp (HF)
@ 1kHz (ISO)
@ 2kHz (ISO)
@ 4kHz (ISO)
@ 8kHz (ISO)
@ 16kHz (ISO)
@ 1kHz (ISO)
@ 2kHz (ISO)
@ 4kHz (ISO)
@ 8kHz (ISO)
@ 16kHz (ISO)
0.1 Full Power
250 Hz
1000 Hz
10000 Hz
0.01 Full Power
250 Hz
1000 Hz
10000 Hz
(1) Average over stated bandwidth. Measured at 1m on axis.
(2) Long term power handling capacity as defined in EIA standard RS - 426A.
(3) Unweighted pink noise input, measured at 1m in an anechoic chamber
60Hz - 23kHz
42Hz
400 - 800 watt / 8 ohm
Average(2) Programme Peak (10ms)
400 watt 800 watt
400 watt 800 watt
70 watt 140 watt
100dB (anechoic)
100dB (anechoic)
107dB (anechoic)
Average
126 dB
126 dB
125.5dB
Nominal
10.55, 500 Hz - 16 kHz
9.0
10.5
9.3
10.9
15.8
13.98, 500 Hz - 16 kHz
7.9
11.2
8.5
12.3
38
2nd Harmonic 3rd Harmonic
1.000% 0.562%
1.412% 1.000%
3.981% 1.778%
2nd Harmonic 3rd Harmonic
0.316% 0.447%
0.447% 0.794%
3.160% 0.316%
1 x 15" (381mm) PowerDual
Constant Directivity Dual Concentric
Passive 1.4kHz
nd
3rd order high pass, 2 order low pass
Product can be reconfigured for active / bi-amped operation
Active sy stem parameters available in section 13 of manual
63.5 litre vented, Birch plywood
Textured black paint (optional in white)
Foam covered, powder coated perforated steel
2 x Speakon NL4MP IN/OUT
Configuration for biamp operation via the termination panel.
Recessed rear mounted carrying handle,
Blanking plate allows installation of a 35mm pole-mounting socket,
8 x M10 bracket inserts allowing for landscape or portrait orientations,
8 x M10 flying inserts.
590mm(H) x 450mm(W) x 420mm(D)
23.23"(H) x 17.72"(W) x 16.54"(D)
32 Kg (70.4 lbs)
www.tannoy.com for further details
1600 watt
1600 watt
280 watt
103dB (half space)
103dB (half space)
Peak
132 dB
132 dB
131.5dB
8.0 ohm (passive fullrange & each driver biamp)
Type number 3816