Table of Contents
Advertisement
1.
Prior to performing service, maintenance, or cleaning procedures, always
make sure the Engine's Ignition Switch is in its "Off" position. Allow the En-
gine to completely cool. Then, remove the Spark Plug Wire from the Spark Plug.
do not alter or adjust any part of the Engine that is assembled and supplied
2.
by the manufacturer or distributor.
3.
Always follow and complete scheduled Engine maintenance.
1.
Avoid contact with hot fuel, oil, and exhaust fumes.
2.
Avoid body contact with fuels, oils, and lubricants used in the Engine.
lowed, seek immediate medical treatment. Do not induce vomiting if fuel is swal-
lowed. For skin contact, immediately wash with soap and water. For eye contact,
immediately flush eyes with clean water.
1.
Prolonged exposure to high noise levels is hazardous to hearing.
ANSI-approved hearing protection when operating or working around the Engine
when it is running.
1.
wARNING!
cover all possible conditions and situations that may occur. It must be understood
by the operator that common sense and caution are factors which cannot be built
into this product, but must be supplied by the operator.
1.
when unpacking, check to make sure all of the parts shown on the Parts List
in this manual are included. If any parts are missing or broken, please call Harbor
Freight Tools at the number shown on the cover (and at the bottom of each page)
of this manual as soon as possible.
SKU 96155
for technical questions, please call 1-800-444-3353.
MECHANICAL PRECAuTIONS
CHEMICAL PRECAuTIONS
NOISE PRECAuTION
MISC. PRECAuTION
The warnings and precautions discussed in this manual cannot
uNPACkING
If swal-
Always wear
Page 6
Advertisement
Table of Contents
