Accessible Drives; Fibre-Channel Controller; Communication/Network - Fujitsu PRIMERGY RX200 S8 System Configurator And Order-Information Manual

Configuration diagram PRIMERGY RX200 S8
System unit (I)
board
Memories
Memory CPU1
(Channel A + B + C + D)
Bank 1 (4 Modules)
Bank 2 (4 Modules)
Bank 3 (4 Modules)
Memory CPU2
(Channel E + F + G + H)
Bank 1 (4 Modules)
Bank 2 (4 Modules)
Bank 3 (4 Modules)
Memory ( III )
rear side
1. PSU 2. PSU
Redundant
power supply
option
SATA or SATA/SAS RAID 0/1
support on-board
Extension slots for
Disk Array (G-VII and H-VII)
SAS and SCSI Controller (X)
Fibre Channel Controller (XI)
Communication/Network (XII)
Slot 4: PCIe-3 x8
Internal slot for modular RAID-Controller
Slot 3: PCIe-3 x8 (low profile, half length)
(170mm incl. bracket)
left slot from rear view
Slot 2: PCIe-3 x8 (low profile, half length)
(170mm incl. bracket) white colored middle slot
Dedicated for modular on-board LAN-Controller
Slot 1: PCIe-3 x16 (low profile, half length)
(170mm incl. bracket)
right slot from rear view
all slots @CPU1
Key:
Included in basic unit
One CPU (first CPU) and one memory (first memory) has to be selected for an orderable basic unit.
CPUs
Xeon 4C, 6C or 8C
CPU incl. Heatpipe
Xeon 4C, 6C or 8C
CPU incl. Heatpipe
Processor ( II )
Xeon 4C, 6C 8C, 10C or 12C
CPU with serial QPI
Interface and
4 memory channels
Double Fan
Redundant Fans
3 riser cards (butterfly for x8 slots rear)
or = Option
Fujitsu PRIMERGY Server
System configurator and order-information guide
PRIMERGY RX200 S8
front side
Accessible drives (V)
Bay for 5,25"x 0,5" SATA-DVD
Only with option 4x 2.5" HD
Hard disk drives (VI)
Option 8x 2.5" HD Option 4x 2.5" HD
incl. bay for DVD
HD8
2.5"x1" SAS
or SATA
HD7
2.5"x1" SAS
or SATA
HD6
2.5"x1" SAS
or SATA
HD5
2.5"x1" SAS
or SATA
HD4
2.5"x1" SAS 2.5"x1" SAS
or SATA or SATA
HD3
2.5"x1" SAS 2.5"x1" SAS
or SATA or SATA
HD2
2.5"x1" SAS 2.5"x1" SAS
or SATA or SATA
HD1
2.5"x1" SAS 2.5"x1" SAS
or SATA or SATA
Status 30-01-2014
right side
HD4
HD3
HD2
HD1
8x 2.5" HDD bays opti
3 of 28