Table of Contents
Advertisement
J ) F_PANEL (2x7 pins connector)
HD (IDE Hard Disk Active LED)
SPK (S peaker Connector)
RST (Reset Switch)
PD+/PD_G-/PD_Y-(Power LED)
PW (Sof t Power Connector)
Ø Please connect t he power LED, PC speaker, reset switch and power switch etc of your chassis
front panel t o the F_PANEL connector according to the pin assignment above.
R ) BAT (Battery)
+
RST-
PW+
RST+
PW-
SPK+
1
PD+
PD_G-
SPK-
PD_Y-
1
HD-
HD+
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Pin 1: VCC(+)
Pin 2- Pin 3: NC
Pin 4: Data(-)
Open: Normal Operation
Close: Reset Hardware System
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Pin 3: LED cathode(-)
Open: Normal Operation
Close: Power On/Off
v Danger of explosion if battery is incorrectly
replaced.
v Replace only with the same or equivalent
type recommended by the manufacturer.
v Dispose of used batteries according t o the
manufacturer's instructions.
- 19 -
CAUTION
Hardware Installation Process
Advertisement
Table of Contents
