Connecting & Syncing; Connecting To A Computer - IRiver astell & kern AK120 User Manual

User Guide
Connecting
Charging
1. Turn on the computer.
2. Use the Micro USB cable and connect the AK120 to
the computer to automatically charge the built-in battery.
Use only the Micro USB cable provided with the product
to ensure safe operation. It may cause malfunction.
Check that it is connected to a high-power USB 2.0 port.
Connecting to a low-power USB port (some keyboards,
USB hubs without their own power supply, etc.), may
prevent normal charging.
Once the computer goes into standby mode, the iriver
device may not be charged. The charging time is about 6
hours and 30 minutes. (Fully discharged, with power off)
Charge the product while it is turned off. When charging
during operation, the full charge display may not be shown.
Using the product during charging may require additional
time for a full charge or the battery may not fully recharge.
Charge and keep the product at room temperature.
Exposure to excessive heat or cold may adversely affect
charging performance.
Battery performance may decline with age and number
of recharges.
Connecting the earphone
1. Plug in the earphone to the earphone jack of the AK120.

Connecting to a computer

1. Power on the AK120 and PC or Mac.
2. When using the Micro USB cable to connect AK120
to the computer. The connection mode selection
window will be displayed on the screen.
Charging & playing: The AK120 can function
normally while being recharged.
Connect a removable disk: Transfer data while
connected to a computer.
Getting Started
05