JVC GZ-MG275AA Instructions Manual page 23

Menus
SHUTTER SPEED
A fast shutter speed can
freeze the motion of a
fast-moving subject, and
a slow shutter speed can
blur the subject to give the
impression of motion.
APERTURE PRIORITY
You can add a blurring
effect to the background by
setting the aperture value
(F-number).
WB
Adjusts the white balance
to achieve the optimum
colours for the amount of
light in your surroundings
during recording.
EFFECT
Enables you to record
videos or still images with
special effects.
TELE MACRO
Enables you to shoot
a subject as large as
possible at a distance of
approx. 40 cm.
Settings: [ ] = Factory-preset
[AUTO] : The shutter speed is adjusted automatically.
1/2 to 1/4000 (For
1/2 to 1/500 (For
The smaller the value, the faster the shutter speed. Move the
set lever to /
NOTE
It is recommended to use the tripod (
with a slow shutter speed.
[AUTO] : The aperture value is adjusted automatically.
F1.2 to F16:
The lower the F-number (larger aperture value), the more
blurred the background will become. The higher the F-
number (smaller aperture value), the clearer the focus will be
for both near and far objects. Move the set lever to
set the value.
NOTE
If the image is too bright, set to a larger F-number. If the image is
too dark, set to a smaller F-number.
[AUTO] : White balance is adjusted automatically.
MWB : Adjusts the white balance manually depending on the
light source.
1) Hold a sheet of plain white paper in
front of the subject so that the white
paper fi lls the screen.
2) Press and hold the set lever until the
indicator starts blinking then stops
blinking.
FINE : When shooting outdoors on a sunny day.
CLOUD : When shooting outdoors on a cloudy day.
HALOGEN : When a video light or similar type of lighting is
used.
[OFF] : No effect is used.
SEPIA : The image has a brownish tint like old photos.
MONOTONE : The image becomes black and white like old
movies.
CLASSIC FILM* : This effect skips frames to give images of an
old movie atmosphere.
STROBE* : The image looks like a series of consecutive
snapshots.
* Not available in mode.
[OFF] : Disables the function.
ON : Activates the function.
mode) /
mode):
to set the value.
pg. 14) when recording
/ to
23