Connection Of A Video Recorder; Connecting A Satellite Receiver And A Video; Connecting A Hifi System - Nokia Mediamaster 210 Owner's Manual

CONNECTING THE MEDIAMASTER

Connection of a video recorder

• Connect a SCART cable between the main SCART socket on
the TV and the TV SCART socket on the Mediamaster.
• Connect an RF cable from the TV/VCR output on the Media-
master to the RF input socket on the video.
• Connect the TV aerial to the TV AERIAL input socket on the
Mediamaster.
• Connect an RF cable from the TV/VCR output on the video
to the RF input socket on the TV.
• Connect a SCART cable between the TV SCART socket on
the video and the AUX SCART socket on the Mediamaster

Connecting a satellite receiver and a video

• Connect a SCART cable between the main SCART socket on
the TV and the TV SCART socket on the Mediamaster.
• Connect a SCART cable between the TV SCART socket on the
satellite receiver and the AUX SCART socket on the Media-
master.
• Connect a SCART cable between the video and the 2:nd
SCART socket on the TV (if available).
• Connect an RF cable from the RF output on the video to the
TV aerial input on the TV.
• Connect an RF cable from the RF output on the satellite re-
ceiver to the RF input socket on the video.
• Connect an RF cable from the TV/VCR output on the Media-
master to the RF input socket on the satellite receiver.
• Connect the TV aerial to the TV AERIAL input socket on the
Mediamaster.
• Connect the coaxial cable between the LNB and the LNB
socket on the satellite receiver.
Both the video and the satellite receiver must be tuned to dif-
ferent UHF channels than the Mediamaster when using RF-
connectors.
The satellite receiver must be switched to OFF (standby)
when you want to watch digital terrestrial channels from the
Mediamaster.

Connecting a HiFi system

• Connect an RCA/Cinch stereo cable from the AUDIO L R sock-
ets on the Mediamaster to the LINE, AUX, SPARE or EXTRA
input sockets on your HiFi system.
• If available you can connect an RCA/Cinch single cable from
the DIGITAL AUDIO socket on the Mediamaster to a HiFi sys-
tem equipped with digital audio input. This output is also used
for connection to an external Dolby™ digital decoder.
Note: To avoid interference you must use screened audio ca-
bles. Never connect digital output to any analog input.
GB 14
RF
video
SCART
video
Satellite receiver