Sp-A - Greenheck CSP Manual

®
PREMIUM CEILING FAN
The SP-A is a Premium Ceiling Fan. It is in the top of its class when it comes to meeting sound
requirements.
• Profile as low as 10 /
1
• Sound levels as low as 0.7 sones.
• Air volume as high as 1,607 cfm.
• UL Listed for above bathtub/
shower with GFCI branch protected
circuit.

SP-A

FEATURES
SP-A
1 Spring Loaded Aluminum Backdraft
Damper - Eliminates rattling or
unwanted backdrafts.
2
Outlet - Both square and round outlets
are field rotatable from horizontal to
vertical discharge.
3
Power Assembly - Removes quickly for
maintenance or conversion from horizontal to
vertical discharge.
4
External Electrical Access - Eliminates removing
motor pack, saving installation time.
5 Electrical Knockouts (horizontal or vertical) -
Eliminates drilling holes.
6
Acoustic Insulation - Absorbs sound.
7
Disconnect - Servicing is quick and safe.
8
Electrical Junction Box - Large for easy wiring.
9
Attractive Designer Grille - Concealed
attachment screws securely fasten grille to
housing for quiet, rattle free operation.
10 Mounting Brackets - Fully adjustable for multiple
installation conditions.
11
Housing - Embossed galvanized steel for rigidity.
12
Motors - All motors are compatible for use
with speed controls and have thermal overload
protection. Both domestic and international
applications available.
• 50 cycle, 220v, and 240v options.
(See page 16 for availability)
• 60 cycle, 115v, 208v, 220v, 230v, and 277v
options.
(See CAPS for availability)
4
inches.
2
7
8
6
3
10
Grille Options Grille Options
Designer - Standard Grille
Decorative - Lighted and non-lighted
Aluminum - White enamel finish
Stainless Steel - Polished stainless steel finish
Round Duct Connection Round Duct Connection
Standard - Sizes A50, A70,
and A90.
Round Duct Adapter Round Duct Adapter
Optional - Sizes A110 through A510
Exclusive Electrical Wiring Feature Exclusive Electrical Wiring Feature
Greenheck SP-A models are the only fans of this type
with an electrical access cover located on the housing
exterior. This feature permits external wiring without
removing the power assembly, saving installation time
and cost.
Vertical Discharge Vertical Discharge
Photo shows exhaust outlet
duct installed in the optional
vertical position. The power
assembly must be rotated
to match the duct adapter
position.
(See SP-A IOM)
Double Wide Fans
Double Wide Fans
Available for applications
requiring 700 cfm or greater.
Double wide fans have two
double width forward curved
wheels, which are housed in
separate scrolls, and driven by
a single motor.
SP
2
5
1
4
12
9
A
11