Memory Function - Ford EDGE Owner's Manual

146
MEMORY FUNCTION (IF EQUIPPED)
1
Programming a Memory Position
1. Switch the ignition on.
2. Adjust the memory features to your desired positions using the
associated controls.
3. Press and hold the desired pre-set button for about two seconds until
you hear a single chime.
You can save up to two pre-set memory positions. You can save a
memory pre-set at any time.
Recalling a Memory Position
Press and release the desired memory pre-set button to recall a saved
memory position.
You can recall a programmed memory position:
• In any gearshift position if the ignition is not on.
• Only in position P or N if the ignition is on.
Recalling a Memory Position with the Remote Control
The memory positions are also recalled when you press unlock on your
remote control (if the transmitter is programmed to a memory position).
To program the memory feature to a remote control, see the Keys and
Remote Control chapter.
Easy Entry and Exit Feature (If Equipped)
This feature can move the seat rearward and the optional steering
column up and forward to allow extra room to exit the vehicle.
This occurs when:
• you place the transmission in position N or P, and
• you switch the keyless ignition off or take the key out of the ignition
switch.
2014 Edge (edg)
Owners Guide gf, 1st Printing, November 2013
USA (fus)
Seats
The memory control, located on the
instrument panel, allows automatic
positioning of the following features
2
to two programmable positions:
• Driver seat.
• Power mirrors.
• Optional power steering column.