PRESONUS FIRESTUDIO TUBE User Manual page 17

9) Turn up the gain control knob on the front panel of the FireStudio Tube for channel 1 while
speaking/singing into the microphone or playing your instrument. You should see the input meter in
Cubase LE react to the input. Adjust the gain so the input level is near its maximum without clipping.
10) Connect a set of headphones to the FireStudio Tube headphone output. You may also wish to connect
monitors to the FireStudio Tube's Main Outs.
11) You are now ready to record.
Cubase LE help is available by pressing <F1> on your keyboard or online by visiting www.steinberg.net.
OPERATION
6) Click the Record Enable button to arm the new
7) Click the Monitor button to hear the input through
8) Select FireStudio Tube input 'Stereo In > Left'.
15 | PreSonus 2008
track for recording.
the FireStudio Tube's 1/2 and Main CR outputs.
When choosing a mono from a stereo pair, the
"left" channel is typically the odd-numbered
channel, and the "right" channel is typically the
even-numbered channel (i.e. Left is 1; Right is 2).
Press <F4> on your keyboard to enter the VST
Connections menu for more details on your
specific input and output routing.