Set Sleep Timer; Play Audio From An External Device - Philips AJ7045D User Manual

Tip
•
If DOCK is selected as the alarm source, yet the audio
cannot be played, buzzer will sound when alarm time
comes.
Activate/deactivate alarm timer
1
Press AL1/AL2 to view alarm settings.
2
Press AL1/AL2 again to activate or
deactivate the alarm timer.
» The alarm icon appears if alarm timer
is on and disappears if it is off.
• To stop the ringing alarm, press the
corresponding AL1/AL2.
» The alarm repeats ringing for the next
day.
Snooze the alarm
When alarm sounds, press SNOOZE.
» The alarm snoozes and repeats ringing nine
minutes later.

Set sleep timer

This clock radio can switch to standby mode
automatically after a preset period.
• Press SLEEP repeatedly to select the sleep
timer period (in minutes).
» When the sleep timer is activated,
appears.
To deactivate the sleep timer:
Press SLEEP repeatedly until [OFF] (off)
•
appears.
15 30 60
OFF
90 120
Play audio from an external
device
You can listen to audio from an external device
through this clock radio.
1
Connect an audio cable to:
the AUDIO IN socket on the clock
•
radio.
• the headphone socket on an external
device.
2
Press SOURCE repeatedly or AUDIO IN
on the remote control to select the Audio-
in source.
3
Play the external device (refer to its user
manual).
EN
12