Factory Reset - Cisco TelePresence SX20 Quick Set Administrator's Manual

Cisco TelePresence SX20 Quick Set
AdministrAtor guide
Table of contents Introduction
Factory reset
When performing a factory reset the call logs will be deleted
and all system parameters will be reset to default values. All
files that have been uploaded to the codec will be deleted.
Release keys and option keys will be preserved.
NOTE: It is not possible to undo a factory reset.
Read the provided information carefully before you perform a
factory reset. Then check the I want to reset...
press Perform a factory reset.
Wait while the system resets. The system will reboot
automatically when finished.
D14908.01 SX20 Administrator Guide (TC5.1) | 2012 FEBRUARY | © 2012 Cisco Systems, Inc. All rights reserved.
Web interface Web interface Advanced settings
box, and finally
Maintenance
Software Upgrade
Certificate Management
Audit Certificate
User Administration
Restart

Factory Reset

Appendices
26
www.cisco.com