Modes Of Operation - Bounty Hunter Quick Draw II Owner's Manual

MODES OF OPERATION

ALL METAL MODE:
P R E S S F O R
ALL METAL TOUCHPAD
There are two ways to enter the
ALL-METAL mode.
1) Turn the right knob (Disc/Notch) left
to the furthest counterclockwise
position. Then Press the Disc/All
Metal touch pad.
or
2) Turn the right knob (Disc/Notch) left
to the furthest counterclockwise
position. Then turn the detector on.
(The detector always defaults to
the Disc/All Metal mode when first
powered on).
P R E S S F O R
DISC TOUCHPAD
DISCRIMINATION MODE:
To enter DISCRIMINATION mode,
1) Press the Disc/All Metal touch pad,
and
2) Turn the Disc/Notch control knob
clockwise
indication.
In the DISCRIMINATION mode, the
detector will emit three distinct
tones, depending on the type of
metal detected.
As you turn the Disc Knob
T A R G E T M O D E
T A R G E T M O D
past the "Disc"
clockwise, you will progressively
"discriminate out," or eliminate
from detection, different types of
metals.
Refer to the illustration below as a
reference for the levels required to
discriminate out different objects.
The DISCRIMINATION mode is a
fixed-start-point system. As you turn
the knob to the right, more objects are
progressively eliminated, including the
items to
DISCRIMINATION for coin-shooting
and detecting in trashy areas.
NOTCH MODE:
P R E S S F O R
NOTCH TOUCHPAD
To enter NOTCH mode, press the
Notch touch pad.
In NOTCH mode, iron is automatically
eliminated.
NOTCH then gives the user a variable
rejection window. In this mode, you
can eliminate items in the middle of
the left. Use
T A R G E T M O D E
11