Adjusting The Sensitivity Of The Moving Faders (D32Xd) - Korg D32XD Owner's Manual

(3) Hold down the D32XD/D16XD's power (ON) key (for 2–3
seconds) and the shutdown LCD screen appear.
If you press the Yes button in the LCD screen, the song will
be saved automatically, and the D32XD/D16XD will enter
the standby state. This process is called "shutdown."
If you press the No button, you will return to the previous
screen.
(4) Press the main power switch (POWER ON) located on the
rear panel of the D32XD/D16XD to turn off the power.
(5) Turn off any devices (such as keyboards) connected to the
D32XD/D16XD's inputs.
When turning the power off, you must perform the shutdown process. Never turn off the main
power switch or disconnect the power cable before shutdown has been completed.
If you turn off the main power switch or disconnect the power cable before shutdown has been
completed, data or user settings will be lost, and the hard disk may be damaged.
The audio you record into the D32XD/D16XD and the mixer and effect settings you make are
automatically saved when you select a song or perform the shutdown process.
Perform the shutdown process when you have finished all activities such as playback or record-
ing. If you will not be using the D32XD/D16XD for an extended period of time (for example
when you have finished working for the day), you must turn off the main power switch on the
back of the D32XD/D16XD.

Adjusting the Sensitivity of the Moving Faders (D32XD)

The D32XD has touch-sensitive moving faders. By
touching a fader that is being automatically moved by
event automation, you can halt automatic changes for
that channel.
By default, the moving fader sensitivity is set to a
standard value. However, we recommend that you
adjust the sensitivity so that it will be optimal for your
environment and the way in which you use the
D32XD.
(1) Press the SONG key, and then press the "Select-
Song" tab.
(2) Press "WAVE FADER" in the demo song list to
highlight it, and then press the Select button.
(3) Press the 1–16/17–32 key to switch to faders 17–32
(the 17–32 LED will light).
(4) Press the SYSTEM key, and then press the "Con-
trol" tab.
(5) Set the Fader Touch Sens value to 30 using the
value dial or the +/– keys.
If you're using a grounded power cable, set the
value to 80.
(6) Press the PLAY key to start playing the song
"WAVE FADER" (the faders will move automati-
cally). Then touch the faders.
(7) If the icon changes to the
touch two or more faders simultaneously,
increase the Fader Touch Sens value.
(8) If touching one fader halts the movement of adja-
cent faders, decrease the Fader Touch Sens value.
If you need to touch a larger number of faders simultaneously,
increase the Fader Touch Sens value slightly.
2
icon when you
(6)
(7)
(8)
(2)
(1) (2)
(7)
(4)
(3)
(6)
(5)
(7)
(8)
(4)
(1)
(5)
(7)
(8)