Ford C-MAX Owner's Manual page 109

Park Heater
Program 1
Program 2
Once
Heat now
E136301
The two time functions allow you to
programme up to two heating cycles
for each day of the week. These times
will remain stored and the heater will
warm up the vehicle at these times on
these days every week.
The function once allows you to
programme one heating cycle for one
specific day.
The function Heat now automatically
switches on the heater.
Programming the functions Program 1
and Program 2
Program 1
[07:55]
Monday
Tuesday
Wednesday
Thursday
Friday
E74468
Climate Control
1. Use the arrow buttons on the steering
wheel to enter the main menu.
2. Select the first programme time list.
3. Highlight the day on which the heater
should warm up the vehicle.
4. Press the OK button.
5. Continue in the same way to select all
the days on which the heater should
warm up the vehicle.
6. To set the time at which the vehicle
should be warmed up, highlight the
time at the top of the display and press
the OK button. The hours start to flash.
7. Adjust the hours and minutes as
necessary.
You can use the second programme time
list to set a second cycle, for example
different times on different days or twice
on the same day. The programming
procedure is the same as for the first
programme timer..
Deactivating the programmed heater
1. Use the arrow buttons on the steering
wheel to enter the main menu.
2. Uncheck the active program session.
Programming the heater for a single
cycle
1. Select Once and press the right arrow
button.
2. Press the OK button and set the
required time and date.
3. Press OK to confirm the set time and
date.
Activating the heater manually
Highlight Heat now and press the OK
button. A cross appears in the box when
the heater is activated.
To deactivate the heater, uncheck the
Heat now function.
107