Crosley CRSH268MB Use & Care Manual page 5

To level the cabinet using the front rollers:
1 Open both doors and remove the toe grille (see "Toe Grille
Installation and Removal" in the "Installation" section).
2 Close the doors and use a flat-blade screwdriver or
socket wrench to raise or lower the front rollers.
3 Ensure both doors are bind-free with their seals touching
the cabinet on all four sides.
To level the doors using the adjustable lower hinge:
NOTE
Some models will not have a set screw. For those models follow
steps 2 through 4.
1 Before leveling either door, remove set screw that locks
door height into position. (The door cannot be adjusted
without set screw removed).
2 If the refrigerator door is lower than the freezer door, raise
the refrigerator door by turning the adjustment screw
clockwise using a /
7
16
3 If the freezer door is lower than the refrigerator door, raise
the freezer door by turning the adjustment screw clockwise
using a 7 / inch wrench. (See illustration.)
16
4 After leveling, verify door stop contacts lower hinge and
top of door does not contact upper hinge through full
movement of door (from fully closed to fully open).
5 Reinstall set screw, locking the door height.
inch wrench. (See illustration.)
7/16" Wrench
and 3/32" Hex Key
/ inch
3
(some models)
8
6 Replace the toe grille by fitting it into place (see "Toe Grille
Installation and Removal" in the "Installation" section).
INSTALLATION
Open Door
Door Stop
Flange
Hinge
Flange
Set Screw
(some models)
Hinge
5