Table of Contents
Advertisement
Williams Serenade Piano
KEYBOARD VOICES
Voice Selection
There are 32 instrument voices. A complete list of all
32 voices can be found in the back of this manual.
Quick Select – Each Voice button (pg. 13) controls
two voices, one in the A bank (printed above the
voice button) and one in the B bank (printed below
the voice button) for a total of 10 Quick Select voices
(8 Presets and 2 User-defined).
To recall a Quick Select voice:
1. Press the VOICE VAR button to select a bank.
Selection alternates between A and B banks (pg. 13)
every time the VOICE VAR button is pressed. The
VOICE VAR button is lit when the B bank is selected.
2. Now press one of the five Quick Select voice
buttons to select the desired voice. The voice name
and number will be shown on the display.
User Defined Quick Select Button – Voice
You can assign your 2 favorite voices to the User 1/
User 2 Quick Select button in the folowing manner:
1. Press and hold the voice USER button (selects
USER 1 for bank A, or USER 2 for bank B) until its
indicator flashes.
2. Select the desired voice by using the
+/YES, -/NO buttons.
3. Press the USER button again; the selected voice
will be assigned to the USER button and available for
quick selection.
Note: The USER button will keep your new setting and
revert to the default setting when the power is turned
off. The default setting is: USER 1= 012: Vibraphone,
USER2 = 032: Halo Pad.
14
ALL:
Demo Song
Selecting From The Voice Menu
A11:
Demo Song
1. If the Voice button indicator is not already lit, press
the any of the voice quick select buttons to engage the
d-9:
Samba Time
voice selection mode. The indicator will light up.
002: Bright Piano
2. Use the +/YES, -/NO buttons to select a voice
018:
Reed Organ
number. The voice name and its number will be
shown on the display.
Layer Level
Note: A sound bank of 128 General MIDI voices and
a drum kit are built into the piano. The additional
General MIDI voices can only be accessed by external
021:
Slap Bass
control to the MIDI IN or USB connections. Please see
the MIDI Section and MIDI Implementation Chart of
Lower Level
this manual for more information.
004:
ALL:
Layer Voice
023:
Slow Swing
Layer refers to an additional voice that is mixed with
A11:
the selected keyboard voice. The assigned layer voice
Tempo
will be heard with the original voice when the layer
feature is engaged.
d-9:
Metronome
1. Press the LAYER button, the currently assigned
layer voice will show on the display, and the indicator
002: Bright Piano
will light up.
018:
Layer Level
2. Use the +/YES, –/NO buttons to select the desired
layer voice. The display will show the layer voice
number and name.
021:
3. Press the LAYER button a second time within 3
seconds and the current layer volume level will show
Lower Level
on the display. The LAYER indicator will remain
lit. Use the +/YES, –/ NO buttons to adjust the layer
volume level ranged 0 -24. Otherwise, this procedure
will be skipped.
023:
Tempo
Metronome
12
14
BroadWay
Demo Song
Demo Song
120
Samba Time
3/4
Reed Organ
12
Slap Bass
14
004:
BroadWay
Slow Swing
120
3/4
Advertisement
Table of Contents
