Operation - Graco 150 RPX Operating Instructions Manual

Operation

1. Engage the In–line Valve safety latch.
2. Firmly tighten pressure roller to 20" extension.
3. Attach pressure roller assembly to In–line
Valve. Use a wrench to tighten.
4. Turn pressure control knob to roller symbol.
5. Disengage In–line Valve safety latch.
Trigger In–line Valve and roll the surface
until paint comes to roller.
NOTE: Trigger the In–line Valve briefly
only when you need more paint. Determine
how often you must trigger the gun to
maintain an even paint supply to the roller.
13
309388