Repair; Bearing Housing And Connecting Rod - Graco HTX 257369 Repair Manual

Repair

Repair

Bearing Housing and Connecting Rod

Removal
Relieve Pressure, page 9.
1. Remove Pump, page 22.
Remove four screws (45) and front cover (44).
2. Remove four screws (64) and washers (63) from
ProConnect bearing housing (40).
63
ti13707a
40
10
45
ti13706a
44
64
3. Pull connecting rod (43) and lightly tap lower rear of
bearing housing with plastic mallet to loosen from
drive housing (33). Pull bearing housing and con-
necting rod assembly off drive housing.
33
B
43
4. Inspect crank (B) and connecting rod (43) for exces-
sive wear and replace parts as needed.
ti13713a
313889B