Advertisement
,
INPUT
OUTPUT
AND ALL
THOSE
FUNKY
BUTTONS
1. Program and bank selector footswitches These
footswitches provide access to the AcousTEC's banks/programs.
2. Power adaptor input This is where the DOD PS200R power
supply is connected. Use only the DOD PS200R, other
adaptors may damage the AcousTEC, and void the warranty.
3. Controller Connect optional DOD VCC1 to have real time control
over volume levels
4. Effect selector buttons These buttons allow you to select the
effects you wish to use or bypass.
5. Display The LED display in program mode shows which bank
and program is currently selected. In Edit mode it shows the
number and/or status of the selected effect. In Tuner mode it
displays the note currently being played.
6. Store Button Use this button to store your custom programs in
the user memory location of choice.
7. Up/Down buttons These buttons scroll up/down selected
effects (edit mode), or up/down through banks/presets
(performance mode).
8. Input Knob Controls the input level from your guitar input.
9. Digital Notch Filter Attenuates selected frequencies in order to
control feedback.
10. Clip LED The clip LED lights when clipping occurs at the input
of the AcousTEC, To eliminate clipping, reduce the setting of
your guitar level, or adjust input knob. Allow the LED to light
occasionally with peak signals.
11. Output jack Connect cable from this jack to your amplifier input,
also doubles as headphone output.
12. Input jack Plug in your instrument here.
MULTI EFFECTS PROCESSING
4
,
3
2
.
1
5
6
7
8
9
10
11
12
Advertisement
