Installing the grass catcher–
The grass catcher should only be fitted or removed when the engine is
stopped. Never raise the rear flap when the engine is running.
Raise the rear flap of the mower.
Grasp the grass catcher by the top handle and position the grass catcher against the rear of
the mower. Refer to Figure 3.
Lower the rear flap so that the back edge of the rear flap hooks over the matching lip on the
grass catcher. Refer to Figure 4.
Figure 3. Grass catcher fitment
Removing the grass catcher
Raise the rear flap of the mower to release the grass catcher.
Lift the grass catcher clear of the mower and lower the rear flap.
Emptying the grass catcher
Remove the grass catcher (as per the instructions above).
Tilt the grass catcher with the opening downwards.
Grip the catcher handle of the grass catcher and shake the
clippings out. Refer to figure 5.
OPERATION - Mulch Mowers (only)
Installing the Mulch Plug
The mulch plug should only be fitted or removed when the engine is stopped.
Never raise the rear flap when the engine is running.
refer figures 3 and 4.
WARNING
Rear Flap
- refer figure 5.
WARNING
4
Figure 4. Grass catcher fitted
Figure 5. Emptying grass catcher