Table of Contents
Advertisement
highlight the "Edit Code" function.
5. Press the ENT/SEL button.
6 Enter the default code "0000".
7. A "New Code" prompt will appear. Enter your
new four digit code using the 0-9 number
buttons. You will then be prompted to confirm
the new code by entering your code again.
8. The lock code is now changed.
Edit Code
Upon entering this mode, the user is prompted to
enter the current four digit numerical code being
used to lock/unlock channel access. Once the
correct code has been entered, the user is
prompted to enter the new 4-digit code twice. The
second entry is requested for confirmation.
Audio Level Options
Upon entering this mode, a 10 segment horizontal
bar graph is displayed with a "-" sign to the left and a
"+" sign to the right. The current setting is indicated
on the bar graph. Pressing the CHANNEL Up/Down
buttons will adjust the bar graph audio level
SRH550C User Guide
indication and audio gain, accordingly. To select and
exit this function, press the ENT/SEL button. No
button activity for 10 seconds will also exit this
function.
Antenna Aiming
Upon entering this mode, two 10 segment
horizontal bar graphs are displayed with a "-" sign
to the left and a "+" sign to the right. The SIRIUS
signal strength is displayed by the SAT graph,
and the terrestrial signal strength is displayed by the
TER graph. Position the antenna to optimize either
the SIRIUS or terrestrial signal. (Refer to page 9.)
The current setting is indicated on the bar graph.
Moving the antenna location adjusts the bar graphs
signal strength, represented by the filled-in bar
graph squares, thus ensuring optimum reception. To
exit this function, press the ENT/SEL button.
NOTE: Terrestrial repeaters are typically used in
large urban areas where structures may affect the
line of sight satellite signal. Terrestrial signals (TER)
may not be available in your geographic location.
29
Advertisement
Table of Contents
