Toyota Tacoma 1999 Operating Manual page 24

CAUTION
"
After putting back the seat,
pushing the seat forward and rear-
ward to make sure it is secured in
place.
"
Never allow anyone to rest their
foot on the press pedal while the
vehicle is moving.
24
—Folding seatback (bench seat)
try
Pull the seatback lock release lever and
fold down the seatback.
Hold the lever until you have swung the
seatback forward slightly.
CAUTION
When returning the seatback to the
upright position:
"
Make sure the seat belts are not
twisted or caught in the seatback
and are arranged in their proper
position and are ready use.
"
Make sure the seatback is securely
locked by pushing forward and rear-
ward on the top of the seatback.
'99 Tacoma (U)
Rear seats (jump seats)
To raise the bottom cushion, pull it up.
To lower the bottom cushion, push it
down.
See "Luggage stowage precautions"
Part 2 for precautions to observe for load-
ing luggage.
CAUTION
When returning the bottom cushion to
its original position, make sure the
seat belts are not twisted or caught
under the bottom cushion and are ar-
ranged in their proper position and
are ready use.
in