Toyota RAV4 2002 Operating Manual page 23

2. In front of the vehicle, pull up the
auxiliary catch lever and
hood.
3. Hold the hood open by inserting the
lift the support rod into the slot.
Before closing the hood, check to see that
you have not forgotten any tools, rags,
etc. and return the support rod to its
clip—this prevents rattles. Then lower the
hood and make sure it locks into place.
If necessary, press down gently on the
front edge to lock it.
CAUTION
After inserting the support rod into
the slot, make sure the rod supports
the hood securely from falling down
on to your head or body.
2002 MY RAV4_U (OM42503U)
'02 Rav4_U (L/O 0108)
Be sure to return the support rod to
its clip before closing the hood. Clos-
ing the hood with the support rod up
could cause the hood to bend.
NOTICE
23