Muting A Part; Recording A Song - Kawai CN42 Owner's Manual

MUTING A PART

Each of the 16 parts can be muted separately.
Step 1
Press one of the VALUE buttons.
The 16 parts will be shown in the LCD display.
123456789
‚‚‚X---‚X‚------
Step 2
Press the MENU buttons to move the cursor, then press the VALUE buttons to set whether the part will be
muted or played.
: The part is played.
If no button is pressed for more than two seconds, the LCD display will return

RECORDING A SONG

The USB Recorder allows up to 16 independent tracks to be recorded separately.
Step 1
After connecting a USB device and pressing the USB button, press the VALUE
Recorder mode.
Empty_Song
Bar= 1- 1 Œ=120
If the USB device is empty, 'Empty_Song' will be shown on the fi rst line of the LCD display.
Press the MENU buttons to scroll through the list of fi les and directories, then press the VALUE button to select 'Empty_Song'.
Step 2
Press the REC button.
Recording information will be shown in the LCD display.
Rec Part= 1
Bar= 1- 1 Œ=100
Step 3
Press the VALUE buttons to select a recording part.
Part 10 is reserved as a drum track. When selecting Part 10, only drum sounds can be played. Similarly, drum sounds
can only be played on Part 10.
When the Rec Part is set to MIDI, all data received from the MIDI IN jack will be recorded on Part 1 to Part 16, according
to the MIDI channel.
X : The part is muted. − : The part is empty.
to the previous screen.
button to enter USB
Page
39
5