To replace the battery
1.
Open the battery cover and remove the
current battery.
As shown in the illustration, pull up the edge of
the battery to remove it.
2.
Load a new battery.
Charge the Battery
You can use either of the two following methods to charge the battery. Before
charging the battery, use the procedure under "Opening and Closing the Frame"
(page 14) to open the frame.
• USB-AC adaptor
• USB connection to a computer
. To charge with the USB-AC adaptor
The adaptor lets you charge the battery while it is loaded in the camera.
While the camera is turned off, connect in the sequence shown below.
Charging time: Approximately 140 minutes
u mark of the small (micro
USB) connector facing the side
opposite that of the monitor
screen.
[USB] port
1
2
USB-AC adaptor
(AD-C53U)
20
USB-AC adaptor
(AD-C54UG)
2
Micro USB cable
(included with camera)
3
Power cord
3
4
Quick Start Basics